Pay in installments of $6.01 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
britax infant positioning insert Britax B-Safe Gen2 FlexFit Infant Car SeatB Safe Gen2 FlexFit pairs trusted Britax safety with the best fit for baby. As the next generation of Britax infant car seats, it has a spacious seating area and tagless smooth touch knit fabric. A steel reinforced base & SafeCell crumple zone give you peace of mind. Two layers of side impact protection surround the head, neck & torso. No rethread harness moves with the headrest for easy height adjustment as baby grows. Easy to install with or without
B-Safe Gen2 FlexFit pairs trusted Britax safety with the best fit for baby. As the next generation of Britax infant car seats, it has a spacious seating area and tagless smooth-touch knit fabric. A steel reinforced base & SafeCell crumple zone give you peace of mind. Two layers of side impact protection surround the head, neck & torso. No-rethread harness moves with the headrest for easy height adjustment as baby grows. Easy to install with or without the base.
Specifications
- Looking for B-Safe Ultra? B-Safe® Gen2™ FlexFitTM is the next generation of Britax infant car seats, made with a spacious seating area and smooth-touch fabric.
- Tagless fabric helps prevent irritation behind your baby’s head; covered harness release button.
- 6-Position, Quick-Adjust Harness & Headrest move together to create the perfect fit as your baby grows—no rethreading, ever!
- Sturdy Build gives you peace of mind while you’re on the go with your baby.
- 2 Layers of Side Impact Protection: Energy-absorbing shell & foam-lined headrest surround the head, neck, and torso.
- High Strength Steel reinforces the car seat base to help keep it stabilized.
- Patented SafeCell Technology acts as a crumple zone, absorbing crash energy to help keep it away from your little one.
- European Belt Guide provides increased stability when installed without the base.
- Exclusive SafeCenter LATCH for secure installation in 3 easy steps: connect lower anchors, pull straps to tighten, click carrier into the base.
- Quick-Push LATCH Connectors lock into place with a click and are easily released with the push of a button.
- 1-Hand Buckle Release to quickly and easily unbuckle baby and keep moving.
- Soft Comfort Pads help keep your child’s neck from rubbing against the harness.
- Built-In Lock-Offs help to ensure a snug vehicle seat belt installation with minimal effort.
- Spring-Assisted Recline helps you find the best installation angle for your vehicle.
- Easy-Read Level Indicators are visible from all angles, clearly displaying the proper installation position for your vehicle.
- Removable Infant Pillow gives your newborn baby support when they are under 11 lbs.
- The ergonomic handle is comfortable to carry with your hand or forearm.
- SPF 50+ Extra-Large Canopy protects your little one from sun and rain.
- Click & Go Stroller Compatibility allows you to pair the car seat with any Britax stroller.
Dimensions & Weight
- 17.9" W x 25.85" H x 26.6" L
- Product Weight - Car Seat Only - 11.6 lbs.
- Product Weight - Base Only - 9 lbs.
- For children 4 - 35 lbs., 32" or less.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 941 reviews
Sort
Product Reviews
★★★★★ 5
Take the guess work out of the flow!
Size: 58.3mm, Color: Black
I got this because when my wife makes espresso, it's watery. When i make it, it's fine. We needed a controlled Tampering method so we both do the same job.
This is heavy, and being able to use the whole hand instead of fingers, not much effort is needed.
Since we purchased this, we were able to make consistent espresso shots for sure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2024
★★★★★ 3
Not as good as I expected
When it first came, the box fell apart as I was taking it out, and a lot of some kind of dirt or sand kept falling out all over my table and floor. I had the take the entire thing apart and thoroughly wash it.
After drying age reassembling it, I tried it on my portafilter that came with my Breville Barista Express, but, somehow, it doesn't always make the tamping level. You would think with the ridge that rests on the side of the portafilter that it would force it to remain level, but, somehow, it doesn't, at least not consistently. It also has varying lengths (heights, or depths), and a single spring tension, so you may still over tamping or under-tamp. I was expecting it would have a censor that would just detect once it reached 30 lbs of force and cut off after that, similar to a torque screwdriver, but that's not what this is.
I'll still give it 3 stars because, despite the problems mentioned above, it at least produces some amount of consistency, even if that isn't measurable; but, I can't give it 5 stars because of those issues mentioned above.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 7, 2025
★★★★★ 5
This is the one.
Size: 58.3mm, Color: Black
As an el Supremo Coffee Geek, I've wasted money on lots of different tampers. Save your money and buy this one or it's equivalent. This thing is heavy duty, solid, well-made, self-leveling, tamps at 30 pounds and is fool-proof even for fools. Also, it's a palm tamper meaning more fun and more satisfying to use as you prep the puck for your morning buzz. Buy it. You will thank me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 30, 2024
★★★★★ 5
Super easy to use and takes the guess-work out of getting even pressure on the grounds
Size: 58.3mm, Color: Black, Size: 58.3mm, Color: Black
I have been using a hand tamper for many years and have a good idea of the pressure I am applying to the grounds in the portafilter. I honestly considered spring tampers to be a bit silly. But this tamper really does take the guess-work out of pressing the coffee grounds. The shroud helps guide the press so that pressure is applied even and flat across the surface. With the manual tamper, there will be some play when pressing, or some unevenness in pressure. This is especially true when cranking out many espressos during a breakfast party with friends. Having the spring tamper makes quick work of turning out a lot of coffees with consistency.
There are no instructions for taking this tamper apart to clean inside, and you may not really need to do that very often. After each use, just pull back the shroud (the black piece that moves up and down) and wipe off the tamper (the shiny steel part). This will help prevent grounds from working their way inside. If you do want to take it apart, it’s easy. Pull back the shroud and unscrew the tamper. It will come apart into three pieces. Wipe the pieces off and reassemble. Super quick and easy.
This tamper is very heavy. My scale shows 656 g (about a pound and a half). It fits the portafilter exactly, with no slop. Just place on top of grounds and press!. Don’t even worry about pressure, just push down all the way. Overall I had fun using this tamper versus my manual one. And since I make myself a cappuccino very early in the morning, I don’t have to be very awake to get a good pack on the grounds and get my coffee fast!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2024
★★★★★ 5
Quality and Function
Looks like a silly little thing, I am not a coffee enthusiast. But it does exactly what it is supposed to do and with high quality. The device (a stretch to call it that) is made of sturdy materials including the needles. They give you two different thicknesses of needles, one for expressi (0.3) and one set for coffee grinds (0.4). Each comes wth some spares. The stand is well designed and keeps grinds from spreading all over. It is very elegant design. I use this with a dosing funnel on my portafilter. Not the cheapest one could buy but well worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 16, 2025